|
DayZ 1.24
|
Go to the source code of this file.
Classes | |
| class | SHumanGlobalSettings |
| class | SHumanCommandSwimSettings |
Variables | |
| float | m_fPhysMoveMaxTracedDistance |
| when actual phys step is lower than this -> distance is traced, otherwise it's just set | |
| float | m_fRunSpringTimeout |
| filter span value [s] | |
| float | m_fRunSpringMaxChange |
| filter speed value [val/s] | |
| float | m_fDirFilterTimeout |
| direction filter timeout [s] | |
| float | m_fDirFilterSprintTimeout |
| sprint direction filter timeout [s] | |
| float | m_fDirFilterSpeed |
| direction filter max rot speed [rad/s] | |
| float | m_fMaxSprintAngle |
| max sprint angle [rad] | |
| float | m_fTurnAngle |
| when character starts to turn (45 deg default) | |
| float | m_fTurnEndUpdateNTime |
| when turn values are not updated anymore (normalized time) | |
| float | m_fTurnNextNTime |
| when next turn is started from previous turn | |
| float | m_fSlidingPoseAngle |
| angle (0.707 * PI) - when angle is bigger - sliding pose is done (rad) | |
| float | m_fSlidingPoseTrackTime |
| time change of angle is tracked in the past (sec) | |
| float | m_fSlidingPoseRepTime |
| not to do sliding pose after another sliding pose (sec) | |
| float | m_fHeadingChangeLimiterIdle |
| float | m_fHeadingChangeLimiterWalk |
| float | m_fHeadingChangeLimiterRun |
| float | m_fLeaningSpeed |
| float | m_fWaterLevelSpeedRectrictionLow |
| Water level (in meters) - m_iMaxSpeedNormal_WaterLevelLow and m_iMaxSpeedFast_WaterLevelLow are applied when character is deeper. | |
| float | m_fWaterLevelSpeedRectrictionHigh |
| Water level (in meters) - m_iMaxSpeedNormal_WaterLevelHigh and m_iMaxSpeedFast_WaterLevelHigh are applied when character is deeper. | |
| int | m_iMaxSpeedNormal_WaterLevelLow |
| Max movement speed for m_fWaterLevelSpeedRectrictionLow when character doesn't want to sprint (-1 means no change) | |
| int | m_iMaxSpeedFast_WaterLevelLow |
| Max movement speed for m_fWaterLevelSpeedRectrictionLow when character wants to sprint (-1 means no change) | |
| int | m_iMaxSpeedNormal_WaterLevelHigh |
| Max movement speed for m_fWaterLevelSpeedRectrictionHigh when character doesn't want to sprint (-1 means no change) | |
| int | m_iMaxSpeedFast_WaterLevelHigh |
| Max movement speed for m_fWaterLevelSpeedRectrictionHigh when character wants to sprint (-1 means no change) | |
| float | m_fAlignIdleTimeout |
| float | m_fAlignIdleMaxChanged |
| align filters in idle, slow, fast | |
| float | m_fAlignSlowTimeout |
| float | m_fAlignSlowMaxChanged |
| float | m_fAlignFastTimeout |
| float | m_fAlignFastMaxChanged |
| float | m_fMovementSpeed |
| float | m_fMovementSpeedFltTime |
| float | m_fMovementSpeedFltMaxChange |
| float | m_fWaterLevelSwim |
| when swimming - entity position depth (1.4 m) | |
| float | m_fWaterLevelIn |
| when entering water - what level cases swimming (1.5m) | |
| float | m_fWaterLevelOut |
| what water level causes to stop swimming (1.2m) | |
| float | m_fToCrouchLevel |
| when to crouch | |
| float | m_fToErectLevel |
| when to stand | |
| float | m_fCharHeight |
| generic settings | |
| float | m_fCharWidth |
| forward pass | |
| float | m_fFwMinHeight |
| float | m_fFwMaxHeight |
| float | m_fFwMaxDistance |
| float | m_fStepFreeSpace |
| forward step | |
| float | m_fStepPositionAfterEdge |
| must be a space to step there | |
| float | m_fStepDownRadius |
| float | m_fStepMinNormal |
| float | m_fStepVariation |
| float | m_fStepMinWidth |
| float | m_fClimbOverMaxWidth |
| float | m_fClimbOverMinHeight |
|
private |
Definition at line 42 of file humansettings.c.
Referenced by DayZPlayer::CommandHandler(), and DayZPlayerImplementJumpClimb::JumpOrClimb().
| class SHumanGlobalSettings SHumanCommandMoveSettings | ( | ) |
Definition at line 1 of file humansettings.c.
Referenced by DayZPlayerTypeUtils::DayZPlayerTypeInitMovement().
|
private |
Definition at line 74 of file humansettings.c.
|
private |
Definition at line 13 of file humansettings.c.
|
private |
Definition at line 74 of file humansettings.c.
|
private |
Definition at line 13 of file humansettings.c.
|
private |
Definition at line 75 of file humansettings.c.
|
private |
Definition at line 14 of file humansettings.c.
|
private |
Definition at line 82 of file humansettings.c.
|
private |
Definition at line 81 of file humansettings.c.
|
private |
align filters in idle, slow, fast
Definition at line 78 of file humansettings.c.
|
private |
Definition at line 77 of file humansettings.c.
|
private |
Definition at line 80 of file humansettings.c.
|
private |
Definition at line 79 of file humansettings.c.
|
private |
generic settings
Definition at line 77 of file humansettings.c.
|
private |
forward pass
Definition at line 80 of file humansettings.c.
|
private |
Definition at line 94 of file humansettings.c.
|
private |
Definition at line 95 of file humansettings.c.
|
private |
direction filter max rot speed [rad/s]
Definition at line 19 of file humansettings.c.
|
private |
sprint direction filter timeout [s]
Definition at line 18 of file humansettings.c.
|
private |
direction filter timeout [s]
Definition at line 17 of file humansettings.c.
|
private |
Definition at line 84 of file humansettings.c.
|
private |
Definition at line 83 of file humansettings.c.
|
private |
Definition at line 82 of file humansettings.c.
|
private |
Definition at line 30 of file humansettings.c.
|
private |
Definition at line 32 of file humansettings.c.
|
private |
Definition at line 31 of file humansettings.c.
|
private |
Definition at line 34 of file humansettings.c.
|
private |
max sprint angle [rad]
Definition at line 20 of file humansettings.c.
|
private |
Definition at line 84 of file humansettings.c.
|
private |
Definition at line 86 of file humansettings.c.
|
private |
Definition at line 85 of file humansettings.c.
|
private |
when actual phys step is lower than this -> distance is traced, otherwise it's just set
Definition at line 16 of file humansettings.c.
|
private |
filter speed value [val/s]
Definition at line 16 of file humansettings.c.
|
private |
filter span value [s]
Definition at line 15 of file humansettings.c.
|
private |
angle (0.707 * PI) - when angle is bigger - sliding pose is done (rad)
Definition at line 26 of file humansettings.c.
|
private |
not to do sliding pose after another sliding pose (sec)
Definition at line 28 of file humansettings.c.
|
private |
time change of angle is tracked in the past (sec)
Definition at line 27 of file humansettings.c.
|
private |
Definition at line 89 of file humansettings.c.
|
private |
forward step
Definition at line 87 of file humansettings.c.
|
private |
Definition at line 90 of file humansettings.c.
|
private |
Definition at line 92 of file humansettings.c.
|
private |
must be a space to step there
Definition at line 88 of file humansettings.c.
|
private |
Definition at line 91 of file humansettings.c.
|
private |
when to crouch
Definition at line 93 of file humansettings.c.
|
private |
when to stand
Definition at line 94 of file humansettings.c.
|
private |
when character starts to turn (45 deg default)
Definition at line 22 of file humansettings.c.
|
private |
when turn values are not updated anymore (normalized time)
Definition at line 23 of file humansettings.c.
|
private |
when next turn is started from previous turn
Definition at line 24 of file humansettings.c.
|
private |
when entering water - what level cases swimming (1.5m)
Definition at line 89 of file humansettings.c.
|
private |
what water level causes to stop swimming (1.2m)
Definition at line 90 of file humansettings.c.
|
private |
Water level (in meters) - m_iMaxSpeedNormal_WaterLevelHigh and m_iMaxSpeedFast_WaterLevelHigh are applied when character is deeper.
Definition at line 37 of file humansettings.c.
|
private |
Water level (in meters) - m_iMaxSpeedNormal_WaterLevelLow and m_iMaxSpeedFast_WaterLevelLow are applied when character is deeper.
Definition at line 36 of file humansettings.c.
|
private |
when swimming - entity position depth (1.4 m)
Definition at line 88 of file humansettings.c.
|
private |
Max movement speed for m_fWaterLevelSpeedRectrictionHigh when character wants to sprint (-1 means no change)
Definition at line 42 of file humansettings.c.
|
private |
Max movement speed for m_fWaterLevelSpeedRectrictionLow when character wants to sprint (-1 means no change)
Definition at line 40 of file humansettings.c.
|
private |
Max movement speed for m_fWaterLevelSpeedRectrictionHigh when character doesn't want to sprint (-1 means no change)
Definition at line 41 of file humansettings.c.
|
private |
Max movement speed for m_fWaterLevelSpeedRectrictionLow when character doesn't want to sprint (-1 means no change)
Definition at line 39 of file humansettings.c.